Argyle & Tuckman’s Theories of Communication

This assignment will discuss two well known theories of effective communication. Firstly it will look at Michael Argyle (1972), the cycle of communication and then it will discuss Bruce Tuckman (1965) stages of communication. Michael Argyle (1972) looks at the cycle of communication which involves six stages this is about sending receiving and the decoding of messages between individual and also groups. 1.An ideas occurs – when one has thought of an idea that they want to express with another person/s2.Message coded – when the idea has been thought through, there is a thought process of how this idea is going to then be communicated. There is a thought as to how this message is going to express it, as it could be through language, writing, sign or symbols or whatever it may be.3.Message sent – articulate the message, may it be verbal, written, sign or use what would be most appropriate in order to communicate effectively.4.Message received – when the messa ge has been heard or seen, depending on how the message was sent in the first place.5.Message decoded – this is where the person who had received the message is starting to make sense of the message. As one tries to decode the message is received is at this point where they can miss interpret the message.6.Message understood – providing that all goes well the initial idea is then understood but sometimes this doesn’t always happen. Once there is understanding thenBruce Tuckman’s (1965), stages of communication looks at how a group of people have to develop their behaviour in order to become an effective group, all to reach a common goal. His sequential theory has four stages of communication. 1.Forming – has been considered to be the introduction stage, where it is not clear to the group what their purpose is. At the same time they put one another under scrutiny as they are not too familiar with each other, so there in not much in the way of trust either. So as a result of this some may not be happy with the idea. Some may be feeling frustrated where as others may just have some issues about working with  particular people. There could be a lack of values and some prejudices may possibly be expressed initially to some members of the group.2.Storming – when putting certain characters together that usually don’t work with one another, it at this stage where the competition is rife as there is a power struggle within the group as some may try to change the team’s mission. This could result in arguments about how the group is going work and what roles each member will be having. Eventually the team itself could splint. As a result of putting different people together, the group begins to form relationships with each other and can sometimes for smaller group. This causes the lack of motivation, anxiety and frustration resulting in the groups failure to complete the mission.3.Norming – during this stag e the trust and respect is developing amongst the members of the group, since it becomes clear that each member has a role and they are aware of what their role will be. As a result of them coming together with a common goal they all have a shared expectation of each other, which is known as norm. They have fully established norm, a set of common beliefs and values. Individuals become more motivated and commitment is demonstrated with each member of the group, whilst the team is being creative. The group now have a fully defined purpose and so success begins to flow within the group.4.Performing – the group now demonstrates that actually they are able to perform the task effectively as members feel comfortable, at ease and have a sense of belonging to the group as a whole. There is a high sense of morale as the group experience high levels of trust, pride and support from each other and so now this group begin to feel that their performance has been of better-quality.More oft en than not I believe that the patterns of behaviour do actually arise in some individuals. There are those that are more extreme than others, whereas some are less extreme but none the less this does not suggest that people cannot work well together. According to Tuckman’s theory these stages can be very effective in breaking down the barriers of  communication within a group of individuals that have a common goal. With Argyle’s theory it is agreed that this very process does actually taken place when communication but at the same time it could easily breakdown when the message has been misunderstood of misheard.

Cameron International Corp Essay

The three major issues facing Cameron International (CAM) are acquisitions, environmental, and competition risk. Cameron International is primarily involved in the manufacture of petroleum production equipment, compression and power equipment to direct flows of oil and gas wells. Acquisitions The company is formerly known as Cooper Cameron Corporation. The company growth depends on the availability of natural resources. To be able to be competitive in the industry, it needs to analyze the existing processes and identify the best production method for harnessing oil and gas, and adjusting it manufacturing operations towards the identified need. The Company made significant investments in improving its services and products over the years. During 2004 to 2005, the company has acquired Petreco International and Dresser Flow Control Businesses. Also, â€Å"Recently CAM paid approximately $44 million to acquire DES Operations Limited, a Scotland-based supplier of production-enhancement technology, which will enhance the subsea operations within the Drilling and Production Systems segment† (value line). Subsea operations is the new direction to which the company is heading. In fact, the company is currently working on more than 15 major subsea projects using motors and other equipment made by an aerospace-industry contractor (Factiva Wall Street Journal). These projects will require a longer time, a large increase in financial scope, a need in substantial engineering, and it will also involve the application of existing technology to new environments or new technology (CAM 10K 2006 p. 7). Because this new operations are larger and more complex than traditional operations, the Company may not be prepared for meeting the expertise and technical requirements of the projects. Failure to meet client’s expectations does not only lead to loss in revenue, but also to loss of the significant financial investments committed by the company towards this innovation. The company has had both success and failures in this new endeavor. Subsea operations account for eight percent (8%) of the company’s revenue in 2006 (CAM 10K 2006 p. 7). According to Fortune magazine, the company has raised earnings by producing an array of subsea valves, wellheads and blowout protectors which are currently on high demand. The result is expected to make Cameron’s profits to climb thirty-nine percent (39%) this year. On the other hand the company experienced backlogs on the projects, amounting to as much as four hundred eight million dollars ($408 millions). Based on these figures, it is clear that the new operations of the Company can be lucrative and risky. As mentioned above, the new operations involve the following risks: not meeting client’s expectations, incurring delay, loss of revenue, loss of opportunity and loss of capital. Environmental Litigation The Company has a strong policy on environment sustainability and has implemented measures to ensure the quality, safety and reliability of its products. It utilizes an all electric sub-sea production system which is designed to reduce environmental contamination risks. It line of compression products offer greater efficiency and reduced emission levels. (Annual report 2006 p. 9) The company has conducted oil risk spills analysis through the OSRA models originally developed by Smith and company, which has been enhanced over the years and uses realistic data fields of winds and ocean currents in the GOM (OCS Report 2007). However, it may be noted that with Cameron’s policy to pursue an electric sub-sea production system, the risk of oil spills is reduced and the likelihood of it being involved in a major oil spill is reduced. In addition to this, the company has exerted efforts towards managing environmental risks involved in subsea operations by contributing in the development of a shut-off device called Environmental Safe Guard. This device has been proven successful in operation under 2000-m water (Simondin, et. al. 2005). Competition Risk Cameron International has maintained a track of growth in the oil industry, from 1833 up to the present. It currently manufactures 50 different brands of drilling and production systems. Growth can be expected to continue. As pointed out in the Company’s annual report (2006), sales of equipment like compression systems has registered a steady increase with the greatest share of revenues accruing from sales outside the United States. The Company has maintained an excellent revenue growth rate at thirty-nine point sixty-seven percent (39. 67%). It also has a net income growth rate of eighty-one point eighty-eight percent (81. 98%), while maintaining a good debt to equity ratio of forty-three point fifty-two percent (43. 2%). Debt to equity ratio is good compared to the industry average of 63% (Corn 2007). A comparison of the company’s ratios with others in the fields provides a clearer picture of its performance in the industry. The company’s touted revenue growth rate is ranked fifteenth (15th) in the industry and is extremely small compared to the leading company. Its long term growth rate is assessed as twenty-one percent (21%), also fifteenth in the industry. These ratios show us that the company’s performance is not the leading company in its industry but it does perform respectably compared with the other players. In its 10K, the company claims that it has a growing global market (CAM 10K p. 7). Some financial analysts agree with this statement. The CEO of Clear Indexes LLC and Clear Asset Management LLC claims that there is an increasing demand for oil in China and India and the Company is â€Å"ideally placed† in supplying the demand for increased production (Corn). However, because of the ties of Corn’s own company with CAM, this statement should not be taken at its face value. In the 30 April 2007 issue of Fortune, the company is only seventh in the industry with Halliburton ranking first. On a positive note, the company did climb up the Forbes 500 list with a present ranking of five hundred fifty-third (553rd) from last year’s six hundred eighty-fifth (685th). (Fortune 500 annual ranking) Based on the analysis above, the company’s performance is acceptable but not stellar. The changes made by the company towards subsea operations may be the wave of the future, providing not only a significant portion of the company’s revenues but also lowering environmental liability risks that are necessarily included in the company’s operations. The move, however, is not without its disadvantages. Subsea operations requires the commitment of large amounts of capital and expertise, expertise that the company has not fully mastered. The failure of the company in this endeavor will adversely affect the company’s growth for years to come.

Communicable disease Assignment Example | Topics and Well Written Essays - 500 words

Communicable disease - Assignment Example A chain of infections is usually made up of 6 causing factors, these are; the infectious agent which are usually the disease causing organisms, the reservoir which is the natural environment the pathogens need for their survival, the portal of exit which is the means by which the pathogens leave the reservoir which is the infected person, the means of transmission which is usually either direct or indirect i.e. physical contact, unprotected sex, the air, or parasites, the portal of entry which is either inhalation, penetration or ingestion, and finally the new host of whom the disease causing pathogens attack. Immunity is the state of having total biological defense to fight disease as well as infections. There are two main types of immunity these are adaptive immunity and innate immunity. Innate immunity is the ability of one’s body to defend itself against infections naturally and it’s a form of body defense one is born with. However, adaptive immunity that is usually subdivided into various categories is a form of immunity that one acquires after weakened disease causing pathogen is introduced into the body making the body develop adapt and develop immunity. In September 2014 onwards, the Center for Disease Control (CDC) as well as other partners have spent countless efforts in investigating reports among children in the USA that have developed sudden weakness in either one of their limbs. MRI scans reveal that children with such symptoms have an inflammation of the grey matter nerve cells that are usually in the spinal cord located in the vertebrate. This infectious disease is Acute Flaccid Myelitis. From the month of August to April this year, CDC has verified reports of more than 118 children in over 34 states including Florida and the county of Miami Dade that have developed the disease. Majority of the children are about 7 years of age and due to the disease have been hospitalized and put

Golden Lines from Robert Ray's Thematic Paradigm Essay

Golden Lines from Robert Ray's Thematic Paradigm - Essay Example These include aging, society and women, and politics and law. They are each discussed much in depth (Ray 1-4). Another quotation I would like to share is on page three. â€Å"If the outlaw hero’s motto was ‘I don’t know what the law says, but I do know what’s right and wrong,’ and the official hero’s was ‘We are a nation of laws, not of men,’ or ‘No man can place himself above the law,’† (Ray 3). This is found in the fourth paragraph on that page. The last quotation to share is â€Å"The evident contradiction between these heroes provoked Daniel Boorstin’s observation that ‘Never did a more incongruous pair than Davy Crockett and George Washington live together in a national Valhalla.’ And yet, as Boorstin admits, ‘both Crockett and Washington were popular heroes, and both emerged into legendary fame during the first half of the 19th century,’† (Ray 4). This quotation can be found on page four in the second

Construction Contract Law 2 Essay Example | Topics and Well Written Essays - 2000 words

Construction Contract Law 2 - Essay Example However, Comfort Kitchens Limited are currently in default of payments, have failed to comply with the conditions of the contract regarding water isolation and have undertaken repairs in breach of the express terms of the contract. As such, there is no contention that Comfort Kitchens is in breach of contract on a strict interpretation of the express contractual terms (Cracknell, 2003). However, the central issue of contention will be X’s rights against Comfort Kitchens for the breach. In business contracts the law distinguishes between breach of conditions and warranties (Treitel, 2007). Only a breach of condition will permit an innocent party to terminate the contract as a fundamental breach (Chitty 2007). Moreover, a fundamental breach will grant the right to sue for damages for the breach (Treitel, 2007). Material breach of contract in contract law is further referred to as repudiatory breach (Treitel, 2007). In the leading case of Suisse Atlantique Societe d’Armement Maritime SA v NV Rotterdamsche Kolen Centralem ([1966] 1 Lloyds Rep 166), Lord Reid defined fundamental breach as â€Å"a well known type of breach which entitles the innocent party to treat it as repudiatory and to rescind the contract†. Moreover, as a matter of law, in the case of Photo Productions Limited v Securicor Transport Limited ([1980] AC 827) it was held that the relevant factor in determining whether a term was a condition or not was the intention of the parties. This wa s further affirmed in the decision of Edward v Skyways ([1964] 1 WLR 349). Nevertheless, it is necessary to protect against abuse of the presumption especially in unequal bargaining power scenarios and case law acknowledges that the presumption in commercial contracts can be rebutted. For example, in the case of JH Milner v Percy Bilton [1966] 1 WLR 1582] it was determined that the presumption of intention

Bonsai Tree Essay Example | Topics and Well Written Essays - 750 words

Bonsai Tree - Essay Example This means that a bonsai is not merely a piece of horticulture. It is horticulture that is refined to the level of an art form. While a bonsai needs the same ingredients as other trees and plants, like land, fertilizers, water and sunlight, it is the way these are administered to the bonsai that makes it a special form of horticulture. All these essential requirements are provided in order to make the bonsai tree take exactly the desired shape and size, leading experts to comment that bonsais are more art than horticulture. They could be kept indoors or outdoors depending on the tree species, but it is the shape of a bonsai tree that determines the type to which it belongs. Bonsais are traditionally created in the following different shapes: Cascade-full (Kengai): In this type of bonsai, the branches as well as the trunk of the tree are deliberately swept over to a particular side of the container and allowed to hang below the roots. It is designed to look like a tree growing at the edge of a cliff, buffeted by strong winds. Clump (Kadudachi). In this variation of the bonsai, there are several trunks emerging from the same point in the clump of roots, giving it a look of overcrowded natural growth that can be found in forests. Informal uprighFormal upright (Chokkan). This is a rigidly classical bonsai, usually with a very linear and upright trunk. The branches spread out in a balanced way so as to take on a triangular form. Group / Forest (Yose-ue). This is where several bonsais are naturalistically planted and maneuvered on a container, so as to give the impression of a wood or forest. Informal upright (Moyogi). In this form of bonsai, the trunk makes its twisty way through the branches, remaining balanced in form all the time. Like the Chokkan, the Moyogi also has a triangular overall formation. Literati (Bunjingi). This bonsai mimics a tree of mature age, with no branches in the lower two-thirds of its trunk. Raft (Ikadabuki). For this bonsai, the tree is laid flat, and its branches are placed in a sort of group formation pointing vertically. Root over rock (Sekijoju). This bonsai has prominent roots which are maneuvered into place so as to flow over the central rock and then into the container itself. Slanting (Shakan). This particular bonsai is a variation of the Chokkan, where the tree is bent in one direction as if seeking light or swayed by the force of the wind. Twin trunk (Sojo). As the name suggests, this bonsai has two trunks that combine at the base, near the container. All these types of bonsais are fascinating to true enthusiasts. Though the practice of bonsai originated in China, it was Japan that refined it, and some of the most exclusive owners and patrons of bonsai are found there. Some bonsais may have prices running into thousands and millions of dollars, because of their age, history, beauty and exclusivity. They are held in reverence in Japan. But prices differ depending on the keeper, the age, the look and the demand. Most bonsais in the United States are much more affordable, and anyone can start off a bonsai hobby with minimal investment by collecting the tree from nature. From fifty dollars to a few hundred,

Outsourcing vs. Off Shoring Assignment Example | Topics and Well Written Essays - 500 words

Outsourcing vs. Off Shoring - Assignment Example One of the criticisms of off shoring is that it denies the local community employment opportunities as it transfers jobs to foreign countries, and therefore companies that participate in off shoring do not directly contribute to the economic development of the local community. As for outsourcing companies, they are mainly criticised for relying on third parties to perform some of their core functions thereby failing to develop in-house knowledge of the outsource functions. Secondly, outsourcing has the potential of misaligning customers’ interest since some core functions of the business are not performed by the company originally contracted (Oshri et al. 2009). Outsourcing and off shoring have similarities in advantages they offer that include reduced cost of operations, sub-contracting of work to equally qualified external workforce, and labour flexibilities. According to the studies conducted by Tuckman (1965), he stated that high performance teams usually follow five common stages or phases that include the forming, the storming, the norming, the performing, and the adjoining stage. For teams that perform either outsourced or off shored tasks, a team leader in the forming stage which is the first stage will bring together different members so as to form the team, at this stage the team leader may just introduce members and then proceed to the next stage, which is the storming stage. Under the storming stage, the team leader will exercise his or her authority by delegating tasks to team members and clearly define the team’s objectives and goals. Under the norming stage, team leaders usually try to control the fallouts witnessed in the storming stage and a well-structured hierarchy is usually established. Under the fourth stage, the team leader usually engage in developing team members as they work towards achieved the objectives and goals that were delegated to the team. The last stage of managing of team is the adjourning stage whereby team

Managing Information Technology Essay Example | Topics and Well Written Essays - 250 words - 5

Managing Information Technology - Essay Example A request of a system demonstrates a comprehensive summary for business requirements along with the integration with business process in order to develop a business value. The concerned personnel or department who generates the request also called as project sponsor, works in parallel with the Information system department staff in order to perform feasibility study (Brown, DeHayes, Hoffer, Martin, & Perkins, 2009). The outcomes of a feasibility study illustrate essential aspects of the proposed project via project sponsor. It involves economic feasibility, organizational feasibility and organized feasibility. Moreover, the project sponsor collectivizes all the funding and resources and deploys a project manager during the initiation phase. Likewise, the concerned project manager requires developing communication with the business departments along with identifying prospects to enhance business processes.

Theme 3 Essay Example | Topics and Well Written Essays - 750 words

Theme 3 - Essay Example change process within an organization, and thus there is a lot that the management can do to enhance the success of the change process (MartinÄ iÄ , 2010:82). In arguing for the assertion by (Mullins 2010: 753), that the management has little it can do about resistance to change, it is apparent that the management cannot force change on the organizational stakeholders such as the employees, considering that change has to emanate from within (Shao-His, Ying-Fang & Shao-Wen, 2012:747). Whenever change is externally driven, it will result to resistance and where resistance is not apparent, the change process will be sabotaged by those opposed to it, or they may quit where it is apparent that change must occur. The problem with this is that, the organization may lose its valuable assets in the quitting employees (Phillips, 1983:191). Nevertheless, to argue against the assertion by (Mullins 2010: 753), it is apparent that the management can do a lot about resistance to change within an organization. This principle can be demonstrated well by the case â€Å"Remaking JC Penney’s Organizational Culture†, where Myron E. Ullman, who was appointed to the position of the chairman and CEO of JC Penney Corporation in 2004, had an elaborate plan on how he could introduce change to the organization, through making the organization a great work place for the employees (ICMR, 2007:2). However, he was faced with a lot of resistance, considering that the organization had a culture of rigidity and formal employee relationship spanning over the past 100 years (ICMR, 2007:2). The rigid rules of addressing the managers formally and dressing strictly in accordance with the organizational dress code had made the environment in the organization tense. This resulted to the inability of the organization to attract new talent or retain new recruits, while the employee turnover increased (ICMR, 2007:3). Nevertheless, after Ullman and the newly hired human resource manager, Michael Theilmann

Hypertension in the South Side Essay Example for Free

Hypertension in the South Side Essay The population of the Southside Neighborhood in Chattanooga, Tennessee is roughly six hundred and seventy three people. The races residing in this community are blacks, Hispanic, native Hawaiian and other races. The black community is the largest followed by the Hispanic community. In the population of this community, the males are three hundred and eighty while the females are two hundred and ninety three. In addition to this, in this community, about two hundred and fifty people have hypertension. The people with high blood pressure are mostly the African American adults and the old people as well as people from the Hispanic background. Literature Review Hypertension or high blood pressure basically means high tension or pressure in the arteries. Arteries are vessels that carry blood from the heart to all the organs and tissues of the body. In addition to this, hypertension does not necessarily mean excessive emotional tension though stress and emotional tension can temporarily increase the blood pressure of an individual. The normal blood pressure of a person is below 120/80 and the blood pressure between 139/89 and 120/80 is known as pre-hypertension and a blood pressure of 140/90 or above is considered high blood pressure (Weir, 2006). The top number is the systolic blood pressure and it corresponds to the pressure in the arteries as the heart contracts and pumps the blood forward into the arteries (Weir, 2006). The bottom number is the diastolic pressure and it normally reflects the lowest pressure to which the arteries are exposed to (Weir, 2006). An elevation of the diastolic or the systolic blood pressure increases the risk of developing cardiac disease, renal disease, hardening of the arteries, and stroke and eye damage. These complications of high blood pressure are normally referred to as end-organ damage due to the fact that damage to these vital organs is the result of chronic hypertension. For this reason, the diagnosis of hypertension is vital so that efforts can be made to normalize blood pressure of a person and thus prevent further complications. According to Turncock (2007), the American Heart Association approximates high blood pressure roughly affects one in three people in the U. S. It is also expected that high blood pressure will affect about two million children and teens and this clearly portrays that high blood pressure is a major health problem in America. Hypertension normally tends to rise with age and this explains the reason that some of the old people in the Southside Neighborhood have high blood pressure. Most of these old people in this neighborhood are older than fifty years old. The most common form of hypertension that they have is the Isolated systolic hypertension. This kind of hypertension only occurs when the systolic blood pressure that is the top number is high. About two adults out of three adults in this community over the age of fifty five who have hypertension have the isolated systolic hypertension (Weir, 2006). In addition to this, the African American population in the community tends to have more severe high blood pressure and is likely to have it earlier in their lives according to the Chattanooga Hamilton Health Department. However, most of them are more likely to be aware that they have hypertension and normally get treatment faster than the Hispanic community residing in the Southside Neighborhood. On the other hand, according to the Chattanooga Hamilton Health Department, the members of the black community have higher rates than the Caucasians of other causes of death other than die from hypertension related complications such as kidney failure and stroke (Turncock, 2006). The Southside neighborhood faces some risks that are prone to hypertension in the future. For instance, a significant number of some teenagers in the neighborhood are obese or overweight and this makes them more likely to develop pre-hypertension. Being overweight is having extra body weight from bone, muscle, water and fat while being obese is having a high amount of fat deposits in the body. However, fewer adult women in the neighborhood have hypertension. In the Southside Neighborhood, there is a community asset that supports the local public health system in promoting health and improving the quality of life. This asset is the Chattanooga Hamilton County Health Department. And it has been quite successful in carrying out its mandate. The Chattanooga Hamilton County Health Department main roles are to track and investigate health problems and hazards in the Southside community. It has been quite instrumental in advocating for healthy eating habits in an attempt to curb the high rates of obesity that are quite apparent in most teenagers in Southside neighborhood. The Chattanooga Hamilton County Health Department has collaborated with the Tennessee Department of Health to use the populating health information systems such as the hypertension registries in an attempt to find out the kind of people at risk of contracting hypertension. In the Southside neighborhood, the residents are somewhat exposed to air pollution and this can have an adverse effect on them that may lead to hypertension. Polluted air has a negative effect on a person due to the fact that blood normally per fuses all of the organs and carry beneficial substances and toxic substances to other organs. In most cases, air pollution is the source of materials that may enter the bloodstream through the mouth, nose, skin as well as the digestive tract. Harmful chemicals such as lead, benzene and heavy metals, volatile nitrites, carbon monoxide, herbicides and pesticides. According to Stoto (2000), these substances are known to produce harmful effects on the bone marrow, blood, lymph nodes and spleen. In addition to this, the blood cells of a person are regularly undergoing turnover with new cells entering the circulation as the mature cells are lost thus making the blood system very vulnerable to environmental poisoning. For instance, lead normally interferes with the normal formation of the red blood cells by inhibiting some significant enzymes. Furthermore, lead damages the membranes of the red blood cells and interferes with the cell metabolism is a manner that somewhat shortens the survival of each cell (Swayne, 2006). In addition to this, some airborne chemicals normally stimulate the immune system to activate macrophages and leukocytes that can produce extensive damage to the tissues, especially to the cells that normally line the blood vessels. Therefore, the combined effect of these events is to speed up changes that ultimately lead to hypertension or high blood pressure. Therefore, the health departments in Southside neighborhood, Chattanooga should ensure that the residents do not come across heavy metals such as lead that is commonly found in children toys and they should also carry out epidemiology programs in an attempt to be aware of any diseases that might be detrimental to the community. Additionally, this health department should raise the residents awareness of the chemicals discussed above as they can cause hypertension or high blood pressure. The local public health system, private medical practitioners and other interested parties in the Southside neighborhood should come together and adapt a Less Stress Health Program, which will consist of seven parts. These parts should be plan well, move well, pray well, eat well, sleep well, think well and abstain well. If adapted by this neighborhood, this program can prevent hypertension as well as the other diseases that are normally borne out of high blood pressure such as renal failure. By enjoying life well, moving well and eating well, the residents of the neighborhood can reduce the chances of contracting high blood pressure. In addition to this, this program should help the residents of the neighborhood to lead healthy lifestyles by taking measures such as developing fitness plans, lowering their blood cholesterol, lowering body weigh, improving their sleep, relaxing through spiritual nourishment as well as developing hopeful and positive thinking patterns and support (Rowitz, 2009). In due time, all these factors if taken seriously by the residents of the Southside neighborhood, then hypertension and other diseases can be an issue of the past. Additionally, this program should adapt the four steps to better health. The first step will be to record the health data. Secondly, with the aid of any health educator is to set goals in each area of the neighborhood. The third step should be to start to make some needed changes and create less-stress health seminars that will offer advice to the neighborhood on how best to combat or prevent hypertension. The fourth step would be to repeat the health record after every three and seven weeks in order to efficiently serve the neighborhood with the necessary advice regarding how to live or prevent hypertension (Weir, 2006). Furthermore, this program should hold campaign against unhealthy behaviors such as lack of physical activity, poor diet and tobacco use as they are risk factors for getting high blood pressure. In addition to this, obesity and overweight are risk factors for hypertension and this program needs to cater to the young people in the Southside neighborhood as some of them are already obese and this can lead to hypertension or other serious illnesses. Lately in the Southside neighborhood, private and public programs are being designed to promote healthy behavior among the youth. In addition to this, employers are becoming more aware that obesity and being overweight as well as smoking as these habits are affecting the productivity and health of their employees and in the end, this affects the businesses. The result of this is that innovative employers are providing their workers with a range of work-site –based health promotion and programs that prevent diseases such as hypertension. In the long run, these programs will improve the health of the workers as well as increase their productivity and capitulate a noteworthy return on investment for the employers (Pinger, 2008).

Failure Of The Ajaokuta Steel Rolling Mill Project Construction Essay

Failure Of The Ajaokuta Steel Rolling Mill Project Construction Essay In the quest to develop its policy in the steel sector the Federal Government of Nigeria under General Gowan era promulgated Decree No.19 on April 14, 1971 setting up the Nigerian Steel Development Authority (NSDA) which was charged with the responsibility for the planning, construction and operation of steel plants in the country. It was in addition tasked with carrying out investigations related to geological surveys, market studies and metallurgical research. The NSDA also embarked on short and long-term training of staff in overseas countries such as India and the Soviet Union on the operation and management of an iron and steel plant. Hence, in 1973, Tiajpromexport (TPE) of the then USSR was commissioned to prepare a preliminary project Report (PPR) on the iron and steel industry in Nigeria. The Report submitted in 1974, studied alternative production schemes based on both local and imported raw materials and was accepted in 1975. A contract for the preparation of the Detailed Project Report (DPR) signed in 1975 with the USSR was submitted to the Nigerian government in October of 1977. With the assistance of Sofresid of France as consultants, a variant of the steel plant was accepted in June 1978. The DPR specified broadly the general layout, composition and requirements as well as a tentative master schedule of the Ajaokuta Steel Plant. It was on the basis of this Detailed Project Report that the Global Contract was signed on the 13th of July 1979 between Nigeria and Tiajpromexport of the Soviet Union for the construction of the Ajaokuta Steel Plant. The signing of this contract signified major commitments on the part of the Nigerian government and the USSR to the development of an iron and steel industry in Nigeria. The Nigerian government on 18th of September 1979 promulgated the National Steel Council Decree No.60 dissolving the NSDA. The new decree provided for the formation of the Ajaokuta Steel Plant as well as five other limited liability companies. These are the Delta Steel Company Ltd., Aladja; the Jos Steel Rolling Mill, the Oshogbo Steel Rolling Mill, the Katsina Steel Rolling Mill, and the then Associated Ores and Mining Company Ltd., now, National Iron Ore Mining Company (NIOMCO) at Itakpe. However, the very long gestation period of the Ajaokuta project meant that the rolling mills had problems of inadequate supply or lack of billets to operate optimally. This contributed significantly to the poor performance of the Nigerian steel sector. The steel companies, rolling mills and the mining company have all now been incorporated as limited liability companies and are expected to be self-funding (BPE, 2005).However, the government of Nigeria wishes to fully divest its equity holdings in the rolling mills. It seeks prospective core/strategic investors with an initial sale plan of acquisition of 80 per cent shares of the rolling mills, while the remaining shares will be offered to the staff of the company as well as the local community (Bureau of Public Enterprises, 2003). 1.1 THE AJAOKUTA PROJECT OVERVIEW The Ajaokuta project was established on the 18th of September 1979, with formation of Ajaokuta Steel Co. Ltd. Which was charged with the responsibility of constructing and operating the Ajaokuta integrated iron and steel plant. The project at inception was envisaged to produce 1.3 million tonnes at its first stage, 2.6 million tonnes at its second stage, and 5.2 million tonnes per annum at the third phase of long and flat products. The principal units of the Ajaokuta Plant include the iron making plant, steel making plant, the rolling mills, repair facilities, auxiliary facilities and the electric power supply system. The envisaged features of the Plant include 150mm Wire Rod Mill, 320mm Light Section and Bar Mill, 700mm Medium Section and Structural Mill and 900/630 semi-continuous Billet Mill Cross Section of ASCL: Source: Julius Berger Plc; Construction period, 10/1980-06/1990 ASCL, 1990). The Ajaokuta integrated plant, which is based on the blast furnace process of iron making, has a raw materials preparation unit that includes the Sintering plant, Coke-oven and By-product unit under the iron-making unit. The rolling mills are four, two of which, namely, the light section and Wire Rod mills were supposed to be the priority rolling mills. In terms of product mix, the Preliminary Project Report (PPR), proposed equal amounts of flat and long products. However, during this period, the national economy was buoyant with the construction industry enjoying a boom, and this led to the decision that the first stage of the plant would be devoted to long products only, while the second stage an expansion to 2.6 x 106 tones, would be for the production of flats. The first phase was therefore designed to produce long products like iron bars, wire rods, angles, squares, channels, beams, and structures. Most of the products were expected to be used in the civil engineering construction industry. However, hindsight shows that the change of the original concept of the plant was a serious error (Ogbu et.al, 1995). 1.2 COMPLETING EFFORTS OF THE AJAOKUTA PROJECT Several successive administration of the federal government had taken measures in the completion of the Ajaokuta project since its inception yet till date the project had not attained the first phase of its installed capacity. In line with the industrial policy of the civilian administration, a Joint Venture Agreement (JVA) between FGN and a Japanese firm, Kobe Steel Ltd, was entered into on May 31, 2002 to provide a Fastmelt Technology for the completion of the plant-phase I. Six months later, another agreement (Financing Agreement F.A) was reached with SOLGAS of USA to finance the project between the FGN and Kobe Steel Ltd on the 29th November, 2002. In a space of another seven months ON June 30, 2003 the Federal Government signed yet another agreement with the same SOLGAS: to extinguish earlier agreements reached and to move ahead to manage the project leaving in the wake too many loopholes, thereby putting into serious questions our techno-managerial ability. As this arrangemen t was in progress, there was on standby TPE to stage a come back. TPE actually submitted to the ministry to rehabilitate the plant at the cost of $300million. The recent effort of the government is the constitution of the 16-man Interim Management Committee after the concession of Ajaokuta steel company to an Indian based company, Global Infrastructure Nigeria Limited (GINL) failed in 2008 on the ground that the Indian firm was short-changing the interest of the country (Olaitan, 2010). The Ministry of Mines and Steel Development received the business plan of the Interim Management Committee for re-operationalising. With this, the seed fund of Six hundred and fifty (N650) million naira only was approved by the federal government to be released to the Interim Management Committee for re-operationalising the Light section mill, the Wire rod mill, the engineering workshops, the Thermal Power Plant at the Steel Plant. According to the Minister à ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒâ€¦Ã¢â‚¬Å"the immediat e phase is re-operationalising, the second is completion of the plants and the third phase is privatizationà ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ã‚ , (Mukhtar, 2010). 1.3 MAJOR CHALLENGES OF AJAOKUTA PROJECT The major problems inhibiting the proper functionality of Ajaokuta Steel Company can be categorized under the following: Funding. Raw material development. Infrastructure. High cost of energy and natural gas. Inappropriate capital structure. 1.3.1 FUNDING. à ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒâ€¦Ã¢â‚¬Å"Many ex-regimes save the Shagari Ekwueme era of the Second Republic had had but a smattering on the importance of the steel dream. Suffice it to say that in the Abacha regime the project was said to have been mortgaged much to the chagrin of compatriots in the industry and the country in general.à ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ã‚ ,(Omonihgo, 2004). It could be concluded that the government has spent a lot on the project, but poor funding has been the bane of completion schedules of the project Second to it is the lack of working capital for the operation of the Rolling Mills and other units of the steel project led to the shot down of these plants resulted in idleness and deterioration of the completed units. There is no gain saying that for a reactivation of these units, substantial working capital is required. 1.3.2 RAW MATERIAL DEVELOPMENT: Mines development, access roads, procurementinstallation of plant and equipment are still outstanding for a number of raw materials input in steel production apart from iron ore. There also, lies the problem of identifying and determining sources of imported raw materials like bauxite and manganese, cooking coal etc. 1.3.3 INFRASTRUCTURE: Apart from raw materials, external infrastructures to and from Ajaokuta steel are lacking. The completion of Warri-Ajaokuta rail line, dredging of, River Niger, and installation of bulk handling facilities at the ports are still outstanding. 1.3.4 INAPPROPRIATE CAPITAL STRUCTURE: Ajaokuta steel company being a public sector steel company has found it extremely difficult to source for funds in the financial market. Consequently, the government has been their source of funds. Sadly, the dwindling economic fortunes of the country via mal administration have made the government incapable of meeting the financial needs of these companies adequately. However, in as much as the nation is over independent on oil and its non diversification of the economy, politics both local and international, corruption has been the bligh of the realization of the steel dream, it remains inevitable that the completion and commissioning of the Ajaokuta steel plant remains the bed rock to Nigerians quest towards industrialization. 2.0 THEORY 2.1 Per Capita Consumption of steel The per capita consumption of steel is the index used to determine the level of industrialisation of a country. The per capita consumption of steel in Nigeria is woefully very small: 10kg, some say it is less than that; while the world average is 130kg. Statistics show that Nigeria is lagging behind even other African countries, with lesser endowments; like: Zimbabwe (25kg), Egypt (42kg), Algeria (38kg) and South Africa (112kg). But Nigeria is richly endowed with extensive deposits of metallic and nonmetallic materials across the country, which is why confronted by this gloomy economic outlook, the African Iron and Steel Association, AlSA, in May 2002 advised the Nigerian government that the nation can deploy her resources to raise up her level of per capita consumption of steel to 100kg, so as to jumpstart industrialisation within the next 10 years, Adding that Nigeria, with a population of over 150 million has a very large room and huge domestic market that can sustain such rapid g rowth. The country will also save for herself a lot of foreign exchange earnings if ASCL and DSC can come on stream, according to AISA. From the foregoing therefore, Nigerias demand for steel is estimated at about 12.0million tonnes per annum to begin industrialisation proper. If ASCL and DSC are operating optimally, then, they would contribute annually 5.2 million and 1.0 million tonnes respectively or cumulatively 6.2 million tonnes per year to the domestic market. It behooves, therefore, that the remaining 50 percent will still need to be imported or, another Ajaokuta and Delta Steel Complexes are required to argument the short-fall in supply. 2.2 Build Own Transfer Solution 2.3 Corporate Governance 3.0 JUSTIFICATION FOR THE RESEARCH

Comparative Mythology: What Similarities and Differences Between Mythos

The Greeks and the Norse are the two sectors of humanity most well known for their mythologies. Both countries have vastly different climates, the Greek were flourishing with their fertile Mediterranean soil and during the country’s prime it was considered a paradisical society. The Norse, however, were stuck with frigid stubborn land and short growing seasons. This is reflected in both mythologies as Greek Mythology, while still explaining heavy subjects such as death and illness, had a much more cheery feel compared to the constantly brooding Norse Gods. The Greek creation myth begin with Chaos a veil of nothingness that surrounds the entire universe. Chaos is also surrounded by an unending stream of water ruled by Oceanus. The goddess Eurynome came out of the stream and with the help with of Ophion, a snake of the North Wind she gave birth to Eros. With the joy of her child she danced upon the waves of Oceanus’ stream making the land and populating it with diverse creatures. Three of these creatures were the Moirae the three sisters of fate who assign men’s birth, destiny, and death. Also born out of Chaos was Gaia, the goddess of the Earth; Ouranus, the god of the sky; Tatarus, the god of the underworld. Gaia and Ouranus had six sets of titan twins and six other monstrous children. Ouranus banished the cyclopes and giants to Tartarus which made Gaia furious. Gaia then called on her Titan children for help exacting her revenge. Only Cronus offered to help cut his father into pieces using a sickle. Cronus then had six children with Rhea, his sister. He proceeded to eat each of these children in paranoia that they were to overthrow him. Rhea, however tricked him of eating Zeus by giving him a rock instead. Zeus then grew up o... ...led an axis mundis and is â€Å"an imaginary vertical axis running as a center pole from the zenith of the sky through the ground, uniting heaven, Earth, and the Underworld.† (p.516, Rogers). The two examples of this are Bifrost and Yggdrasil, the second of which might represent how important plant life is to the Nords as if Yggdrasil were to die the apocalypse would erupt.Norse believe that the Titan, Ymir, had to die for Earth’s creation, while the Greeks believe that the Earth was created by Eurynome simply bounding on the ocean. This may further reflect the ease in which crops grow in the origins of the mythos. Works Cited  Rogers, Eugene F, Jr. Theology and Secuality: Classic and Contemporary Readings. Oxford: Blackwell Publishers Inc., 2002. Print. Myers, Nicole. Comparisons of Creation Myths. Seminole State College of Florida. 19 Feb. 2009. Web. 20 May 2014.

Current Free Speech Doctrine: Will It Work On The Internet? :: essays research papers

The Internet offers a much greater potential for interactive communication between information senders and receivers than the more traditional methods of communication such as newspaper, radio and television. Freedom of speech ascertained by the constitution is not an absolute right. Depending on the medium through which information is delivered various degrees of the freedom to express one's self is protected. Internet communication may be analogous to either a specific existing communication medium or even several. Current free speech protection begins to dissipate as it is applied to the uncertain confines of the newly developed Cyberspace. The traditionalist approach to free speech protection is centered on core values and yields results that are basically neutral so that content allowed through one communication medium is permissible in all media.Freedom of speech and of the press is a basic tenant of United States constitutional law. Perhaps concern for the English use of prior restraint (licensing of press) and seditious libel was the reason for including the first amendment in our bill of rights. When the first amendment became law the printed page was the most widely used non-verbal medium of speech. Speech, as we understand it, involves more than verbal communication. Speecht includes pictures, movies, radio, television and expressive conduct [Shelton v. Tucker, 364 US 479 (1960)]. As technology advanced and additional communication medium developed, speech was given various levels of first amendment protection depending on the medium through which the information was delivered.Cyberspace is a network of computer systems permitting literally millions of people to communicate with one another on an hourly basis. Cyberspace may mirror other types of communication medium singularly or several at one time. Current free speech protection approaches break down when applied to Cyberspace since one may prohibit speech when delivered by one medium but permit identical speech delivered via a different medium. A core values approach protects identical speech regardless of the medium in which it is delivered. So it is a foundation for Cyberspace and promotes development of new technology. That, "Congress shall make no law..., or abridging the freedom of speech", suggests an absolute right to speak. Justice Black dissenting in Konigsberg felt that freedom of speech was absolute [Konigsberg v. State Bar of California, 366 US 36 (1961)]. Justice Harlan writing for the majority rejected an absolute right, noting that protected freedom of speech was less than an unlimited license to talk.

Peter I (The Great) Essay -- essays research papers fc

Peter I, was born to Alexis Romanov and his second wife Natalia Naryshkina. Peter grew up in a turbulent period of Russian history. His father’s early death at the age of thirty-one left a bitter struggle for power between the family of Alexis’s first wife’s family, the Miloslavskaias, and Peter’s family. A brief period of reign by Peter’s half brother Fedor (1676-1682) was followed by his half sister Sofia assuming control of Russia as regent from 1682-1689. During this time Peter and his half brother, Ivan V, waited as co-Czars until they came of age. Meanwhile Peter spent many of his formative years in the country estate of Preobrazhenskoe, just outside of Moscow. It was here that Peter fostered his love of warfare, and had his first contact with Westerners. Rather than being educated in the traditional manner, Peter was allowed to play war games. From an assortment of commoners, courtiers, and foreigners Peter formed two regiments, the Preobrazhenskii and Semenovskii, which he outfitted with real weaponry and drilled into what would later become his imperial guard. Also during this time, Peter developed two other passions. The first was sailing, which he first came in contact with by discovering an old English sailboat. The second was the love of all things Western, which came from his frequent visits to the nearby foreign quarter of Moscow. By 1689 Peter had grown to the towering height of six feet seven inches, and was armed with a quick mind and boundless ambition. At...

Mcdonald

System wide sales. They operate over 30,000 restaurants, around 420,000 workers In more than 100 countries on six continents. McDonald's sells various com/%EF%BB%BFhome-cooked-meals-vs-fast-food/">fast food Items and soft drinks including, burgers, chicken, salads, fries. Breakfast meals and ice cream and etc. Objectives: 1. To be able to serve well to customers by providing best quality of food and service. 2. To increase the business capacity to produce more foods or provide better or greater service, 3. To become better public Images of fast food. 4. To become greater brand name and Image that will Increase more franchises. 5.To be a social responsible company and provide good returns to shareholders. Vision and Mission Statement: Vision Statement To be the world's best quick service restaurant experience. Being the best means providing outstanding quality, service, cleanliness, and value, so that we make every customer in every restaurant smile. Mission Statement To â€Å"be our customers' favorite place and way to eat. † Our worldwide operations have been aligned around a global strategy called the Plan to Win centering on the five basics of an exceptional customer experience – People, Products, Place, Price and Promotion.We are committed to Improving our operations and enhancing our customers' experience. External Audit: Opportunities I Threats I 1. Growth of the fast food industry. 2. Expansion in other countries, especially in Latin America, China, and other Asian countries. 3. Increasing trend on healthy food/ products (Especially Low calorie products) approved by FDA. 4. Low price food that will attract to the customers. 5. Freebies and Discounts. 6. Conversion of other quick-service restaurants into franchises. 7. More playgrounds for the children in more restaurants. (should be enough space for that).

Enthalpy of formation of calcium carbonate Essay

Objective To determine the enthalpy of formation of calcium carbonate Procedures A. Reaction of calcium with dilute hydrochloric acid 1. 1. 0909 g of calcium metal was weighed out accurately. 2. 100 cm3 of approximately 1 M hydrochloric acid was pipetted. and placed in a plastic beaker. 3. The initial temperature of the acid was determined 4. The weighed calcium was added into the acid and stirred thoroughly with the thermometer until all the metal had reacted. 5. The maximum temperature attained by the solution was recorded. 6. The experiment was repeated with 1. 0538g calcium metal. Results: Experiment no. 1 2. Mass of Ca used/ g 1. 0909 1. 0538 Initial temp. of solution/ ? 27 26 final temp. of solution/ ? 55 52 Temperature change/ ? 28 26 Calculations and Discussion: 1. What does the term â€Å"heat of formation† of a substance mean? Heat of formation refers to the heat change when one mole of a substance is formed from its constituent elements is their standard states under standard conditions. 2. What are â€Å"standard conditions† for thermochemical calculations? Standard conditions is defined as elements or compounds appear in their normal physical states at a pressure of 1 atm (101325 Nm-2/760mmHg) and at temperature of 25 oC (298 K). Moreover, the solution should have unit activity(1mol dm-3 ). 3. Write the equation for the formation of calcium carbonate under standard conditions. (Call this Equation 1) Ca(s) + C(s) + 3/2 O2(g) –> CaCO3(s) 4. Write an ionic equation for the reaction taken place. (Call this Equation 2) Ca(s) + 2H+(aq. ) ? Ca2+(aq. ) + H2(g) 5. Assuming (a) the solution in the plastic beaker has the same specific heat capacity as water, i. e. , 4. 2 kJg-1K-1 and (b) density of the acid is the same as that of water, i. e. , 1. 0 g cm-3. Calculate, in each experiment, the heat change in the reaction between the calcium and the acid per gram of calcium. For the first experiment: ?Energy evolved by the reaction= Energy absorbed by the acid ?By E = mc? T, ?H per gram of calcium = [(100/1000)(4200)(28)]/ 1. 0909 = -10780J g-1 = -10. 780kJ g-1 For the second experiment: ?Energy evolved by the reaction= Energy absorbed by the acid ?By E = mc? T, ?H per gram of calcium = [(100/1000)(4200)(26)]/ 1. 0538 = -10362J g-1 = -10. 362kJ g-1 6. Calculate the average heat evolved by one mole of calcium. For the first experiment:?H per one mole of calcium =[(100/1000)(4200)(28)]/ [1. 0909/40. 08] =-432066 J mol-1 =-432. 066 kJ mol-1 For the second experiment: ?H per one mole of calcium =[(100/1000)(4200)(26)]/ [1. 0538/40. 08] =-415329 J mol-1 =-415. 329 kJ mol-1 Average ? H per one mole of calcium (? Hx) =(432. 066 +415. 329)/2 =-423. 698 kJ mol-1 7. Why is the exact concentration of the hydrochloric acid unimportant? Approximate concentration of hydrochloric acid is not considered as one of the errors. In the reactions, limiting agents, i. e. calcium and calcium carbonate, must be reacted completely. Only these matter in the reaction but not the amount of H+(aq) provided in hydrochloric acid. Indeed, the concentration of the hydrochloric acid just affects the rate of the reaction. Therefore the exact concentration of hydrochloric acid is unimportant provided that there is enough H+(aq) to react with limiting agents completely. 8. Should we measure the volume of acid with a measuring cylinder? Why? The measuring cylinder should not be used to measure the volume of acid. This is because the heat absorbed by the acid must be counted when calculating the heat change of the reaction. As the acid has very high specific heat capacity, the errors in calculating the heat change of the reaction will be very significant if the heat absorbed by acid is not taken into account. Thus, the volume of acid should be obtained accurately to apply into E=mc? T in order to calculate the heat absorbed by the acid accurately. As the scale of the measuring cylinder is far from accurate, the pipette should be used instead. B. Reaction of calcium carbonate with dilute hydrochloric acid 1. 3. 0940g of dry powdered calcium carbonate was weighed out accurately and placed directly into a clean dry plastics cup. 2. 100 cm3 of approximately 1 M hydrochloric acid was pipetted into another beaker. 3. The acid was poured on the carbonate in the plastic beaker. 4. The solution was stirred briskly with the thermometer and the maximum temperature reached by the solution. was recorded. 5. The experiment was repeated with 2. 7400g of dry powdered calcium carbonate. Results: Experiment no. 1 2 Mass of CaCO3 used/ g 3. 0940 2. 7400 Initial temp. of solution/ ? 26 25 final temp. of solution/ ? 28 27 Temperature change/ ? 2 2 Calculations and Discussion: 1. Write an ionic equation for the reaction taken place. (Call this Equation 3) CO32-(aq. ) + 2 H+(aq. ) ? CO2(g) + H2O(l) 2. Calculate the average heat evolved by one mole of calcium carbonate. (Making the same assumptions as in Part A) For the first experiment: ?Energy evolved by the reaction= Energy absorbed by the acid ?By E = mc? T, ?H per mole of calcium carbonate = [(100/1000)(4200)(2)]/[(3. 0940/(40. 08+12. 01+16Ãâ€"3)] =840 /[(3. 0940)/(100. 09)] =-27174 J mol-1 =-27. 174 kJmol-1 For the second experiment: ?Energy evolved by the reaction= Energy absorbed by the acid ? By E = mc? T, ?H per mole of calcium carbonate = [(100/1000)(4200)(2)]/[(2.7400/(40. 08+12. 01+16Ãâ€"3)] =840 /[(2. 7400)/(100. 09)] =-30685 J mol-1 =-30. 685 kJmol-1 Average ? H per one mole of calcium (? Hy) =(27. 174 +30. 685)/2 =-29. 080kJ mol-1 3. Draw an energy-cycle linking Equations 1, 2 and 3 together, you must include reactions that had not been performed in the experiment. 2H+(aq. ) +Ca(s) + C(s) + 3/2 O2(g) CaCO3(s) + 2H+(aq. ) ?Hx ? Hy Ca2+(aq. ) + H2(g) + C(s) + 3/2 O2(g) Ca2+(aq. ) + CO2(g) + H2O(l) 4.. Besides your experimental results, what other information do you need to enable you to calculate the heat of formation of calcium carbonate? Look up these necessary data from any suitable source. The enthalpy change of formation of water: -286 kJ mol-1 The enthalpy change of formation of carbon dioxide: -393 kJ mol-1 5. Calculate the heat of formation of calcium carbonate. ?H? f [CaCO3(s) ] =? Hx +? H? f [CO2(g)] +? H? f [H2O(l) ] -? Hy =-423. 698-393-286+29. 080 =-1073. 6 kJ mol-1 6. As far as you can, list out the major sources of inaccuracy in the experiment and suggest ways to improve them whenever possible. Sources of error: – Heat loss to surrounding by evaporation, conduction and radiation. -The thermometer absorbed some energy. – The specific heat capacity and the density of the solution are not actually the same as those of the water. -Some of the samples failed to dissolve completely? – The reading of the thermometer is not accurate enough. -The experiment was not exactly carried out under standard conditions. -Some heat was gained by the gases, a considerable amount of heat is loss to surroundings when the gases are releasing. -The lid covering the plastic cups cannot prevent heat loss efficiently. -Heat capacities of plastic cups and thermometer were ignored. -The samples were not pure calcium and pure calcium carbonate due to air oxidation and reaction with moisture in air. Improvements -Use the vacuum flask calorimeter with a cork stopper instead of the polystyrene foam cup -Use a more accurate reading thermometer (e. g. Beckmann thermometer) – Find out the specific heat capacity of other materials other than water. -Use sand paper to remove the oxide layer on calcium metal. -Use powdered calcium instead of the granules in order to increase the rate of reaction ,so that the heat loss to the surroundings can be reduced 7. State the law which you have used in order to answer Question (5). The heat of formation of calcium carbonate cannot be determined directly by calorimetric experiments as there are several experimental difficulties : -The extent of the reaction cannot be controlled -Heat evolved cannot be separated into appropriate terms -Direct combustion of calcium can be violent -Side reactions may arise, for example, 2Ca(s) + O2(g) 2CaO(s) C(s) + O2(g) CO2(g) Then ,Hess’s Law is applied to calculate the heat of formation of calcium carbonate. Hess’s law states that the energy change for any chemical or physical process is independent of the pathway or number of steps required to complete the process provided that the final and initial reaction conditions are the same. In other words, an energy change is path independent, only the initial and final states being of importance. This path independence is true for all state functions 8. State the law which you have used in order to answer Question (7) depends? Why is this principle useful? The law of conservation of energy states that energy can neither be created nor destroyed but can be changed from one form to another. In order to achieve the answer, Hess’s law is used. Hess’s law states that the total enthalpy change of a reaction is independent of the route by which the reaction takes place. In other words, the standard enthalpy change of a reaction depends on the differences in standard enthalpy between the reactants and the products. It means that the enthalpy of the reaction system is conserved. As the absolute enthalpy of a substance is not possible to be determined and only the difference between reactants and products can be measured experimentally. This law helps us to define the standard enthalpy change of a reaction. Conclusion The enthalpy of formation of calcium carbonate is -1073. 6kJ mol-1. Reference http://hk. knowledge. yahoo. com/question/? qid=7006100200879 http://hk. knowledge. yahoo. com/question/question? qid=7007111800043 http://www. answers. com/8. %09Should+we+measure+the+volume+of+acid+with+a+measuring+cylinder%3F+Why%3F http://hk. search. yahoo. com/search/kp? ei=UTF-8&p=word%E6%89%93%E5%88%86%E7%B7%9A&rd=r1&fr2=tab-web&fr=FP-tab-web-t F. 6 Chemistry Notes Section III by Ms Sin W L.

Clean. The importance of cleanliness Essay

Cleanliness is both the abstract state of being clean and free from dirt, and the process of achieving and maintaining that state. Cleanliness may be endowed with a moral quality, as indicated by the aphorism â€Å"cleanliness is next to godliness, and may be regarded as contributing to other ideals such as health and beauty. In emphasizing an ongoing procedure or set of habits for the purpose of maintenance and prevention, the concept of cleanliness differs from purity which is a physical, moral, or ritual state of freedom from pollutants. Whereas purity is usually a quality of an individual or substance, cleanliness has a social dimension, or implies a system of interactions.[2] â€Å"Cleanliness,† observedJacob Burckhardt, â€Å"is indispensable to our modern notion of social perfection.†[3] A household or workplace may be said to exhibit cleanliness, but not ordinarily purity; cleanliness also would be a characteristic of the people who maintain cleanness or preven t dirtying. On a practical level, cleanliness is thus related to hygiene and disease prevention. Washing is one way of achieving physical cleanliness, usually with water and often some kind of soap or detergent. Procedures of cleanliness are of utmost importance in many forms of manufacturing. As an assertion of moral superiority or respectability, cleanliness has played a role in establishing cultural values in relation to social class, humanitarianism, and cultural imperialism. It is important to maintain a standard of cleanliness in your room at all times. If you don’t keep your room up to standards then you are facing many possible problems. If you leave clothes that are to be worn the next day on the floor then you are getting them more dirty than they already were. This can cause you to get sick from the dead skin cells, dirt, grime, and other things that are on your floor. If the clothing worn is not often washed, and frequently aired, it becomes filthy with impurities which are thrown off from the body by sensible and insensible perspiration. And if the garments worn are not frequently cleansed from these impurities, the pores of the skin absorb again the waste matter thrown off. The impurities of the body, if not allowed to escape, are taken back into the blood, and forced upon the internal organs. This then can lead to fevers and then possibly into harmful  diseases. If you don’t follow the standards then you have many negative aspects that can cause more problems in the future. Besides your clothing you should also always wash your hands every time you use the bathroom, before and after meals, and anytime they are dirty. This will help keep some diseases from your health because your hands are the dirtiest part of your body and if you put them on food that you put into your mouth you could get very sick. Another reason why it’s important to keep your room clean is if you have a dust allergy. Within your room dust mounts up incredibly quickly and that can leave an allergy sufferer in a lot of distress. So you need to clean to get rid of the dust. Another example could be if you didn’t clean up your room and bits of food were left everywhere going moldy. It would attract pests into the room which could potentially give you health problems as pests usually are dirty and they can pass various things onto you. Seeing as germs and parasites like to hide in unclean places, cleanliness is very important.

Listening And Writing In Esol Planning And Teaching Education Essay

Talking, listening, reading and composing are considered to be reciprocally mutualist upon one another in linguistic communication acquisition. Although talking coherently and clearly is by and large recognised as the most of import end for 2nd linguistic communication ( L2 ) talkers, peculiarly ESOL talkers ( Murphy 1991:52 ) , competency in reading and composing finish a scholar ‘s proficiency in L2. Speaking and hearing may be described as the major accomplishment countries of interpersonal communicating ( Murphy 1991: 52 ) . Whether through synergistic or teacher-instruction, the hearing accomplishment will find how scholars develop eloquence and competency in the linguistic communication being learnt ( Nation and Newton 2009 ; Ellis 2003 ) . Listening is cardinal in linguistic communication acquisition because it non merely aids competency in speech production, but besides in reading. Ellis ( 2003 ) has noted that research workers and instructors have their ain purposes in prosecuting hearing as a linguistic communication accomplishment. For research workers, listening provides agencies for look intoing scholars ‘ ability to treat specific lingual characteristics ( Ellis 2003: 37 ) . In position of this, he suggests that focused undertakings can be devised by ‘seeding ‘ the input with the targeted characteristic and planing the undertaking in such a manner that the merchandise result can merely be achieved if the scholars are successful in treating the targeted characteristic. Therefore, listening undertakings provide an first-class agencies for mensurating whether scholars have acquired the characteristic in inquiry. On the other manus, listening accomplishments can be devised to ease the acquisition o f the targeted characteristic ( Ellis 2003: 37 ) . This essay discusses how the four linguistic communication accomplishments of hearing, reading, speech production and composing are mutualist in assisting a scholar achieve competency in larning English as a 2nd linguistic communication. As we already know, synergistic linguistic communication larning depends a batch on listening and talking accomplishments ( Ellis 2003 ) . However, a good balanced linguistic communication class which consists of four approximately equal strands of learning/instruction in the linguistic communication schoolroom ( Nation and Newton 2009 ) , known as meaning-focused input, meaning-focused end product, language-focused acquisition, and eloquence development, conveying out the common dependence of the four linguistic communication accomplishments. The four strands methodological analysis as described by Nation and Newton ( 2009:1 ) may be summarised as follows: larning though meaning-focused input, that is, larning through hearing and reading where the learners'attention is on the thoughts and messages conveyed by the linguistic communication larning through meaning-focused end product, that is, larning through speech production and composing where the learners'attention is on conveying thoughts and messages to another individual larning through deliberate attending to linguistic communication points and linguistic communication characteristics, that is, larning through direct vocabulary survey, grammar exercisings and account, through attending discourse characteristics and consider acquisition and pattern of linguistic communication acquisition and linguistic communication usage schemes, and larning through developing fluid usage of known linguistic communication points and characteristics over the four accomplishments of hearing, speech production, reading and composing Second linguistic communication acquisition shows that suitably focussed attending to linguistic communication points can do a really positive part to acquisition ( Doughty 2003 ; Doughty & A ; Williams, 1998 ; Ellis 2005 ) . A well-planned linguistic communication class has an appropriate balance of these four strands. Through these four strands the scholars achieve the learning ends of a linguistic communication class, viz. fluid control of sounds, spelling, vocabulary, grammar and discourse characteristics of linguistic communication, so that they can be used to pass on efficaciously. A justification of the four strands is the time-on-task rule, that is, learning-to-read by reading or learning-to-write by composing ( Nation & A ; Newton 2009:2 ) . The more clip one spends making something, the better they are likely to make it. Those who read a batch, for case, are better readers ( Cunningham & A ; Stanovich 1991 ) , and those who write a batch normally become better writes. The grounds for the four strands draws on a big and turning organic structure of research into the functions of input, end product and focussed direction on L2 acquisition and on development of speech production and reading eloquence ( Nation & A ; Newton 2009:3 ) .Meaning-focused input: acquisition through hearing and readingThe meaning-focused input strand involves larning through hearing and reading, that is utilizing linguistic communication receptively. It is called ‘meaning-focused ‘ because in all the work done in this strand, the scholars ‘ chief focal point and invol vement should be on understanding, and deriving cognition or enjoyment or both from what they listen to and read. Typical activities in this strand include extended reading, shared reading, listening to narratives, watching Television or movies, and being a hearer in a conversation ( see Hinkel 2006 ) .Meaning-focused end product larningMeaning-focused end product involves the scholars bring forthing linguistic communication through speech production and composing were the scholars ‘ focal point is on others understanding the message ( Nation & A ; Newton 2009 ) . It occurs when scholars write essays, and assignments, when they write letters, dairies, direct electronic mail and text messages to each other and when they write about their experience. As spelling is peculiarly of import in authorship, holding to compose can do scholars cognizant of the spreads in their spelling cognition ( Nation 2009:18 ) . Writing activities that can assist with spelling are copying, delayed copying, read and compose from memory, command, the assorted signifiers of guided authorship, composing with the aid of a dictionary and free authorship.Language-focused acquisitionLanguage-focused acquisition has many names ; concentrate on signifier, form-focused direction, deliberate survey and consider instruction or acquisition as opposed to acquisition, or knowing acquisition ( Nation & A ; Newton 2009:7 ) . It involves calculated acquisition of linguistic communication characteristics such as pronunciation, spelling, vocabulary, grammar and discourse. A assortment of activities may be used, such as pronunciation pattern, utilizing permutation tabular arraies and drills, larning vocabulary from word cards and intensive reading. Other activities may be interlingual rendition, memorizing duologues an acquiring feedback about authorship. There are legion techniques for giving calculated attending to spelling, for illustration. . The critical factor is doing certain that there is an appropriate balance of each of the four strands so that there is some calculated attending to spelling but this attending does non go inordinate. Deliberate attending can include a figure of activities such as screen and recover, utilizing analogies, utilizing word parts, articulating the word the manner it is spelled and visualizing. There is need to look at each of these techniques:Cover and RetrieveThe scholar writes a list of hard to spell words down the left-hand side of the page ( state 2009:19 ) . The first missive or two of each word is written following to it, for illustration: yacht Y happening O The words are studied and so covered and each word is written from memory utilizing the first missive hint. The first missive is written once more so that the activity can be repeated. yacht yacht YUsing analogiesWorking with the instructor or in little groups, the scholars think of known words that portion similar spelling characteristics to words that they have trouble in spelling. For illustration, if larning to spell ‘apply ‘ , the scholars think of the known words ‘reply ‘ , ‘supply ‘ which are words with similar spelling characteristics and sound ( Nation 2009:19 ) .Using word partsWord parts may be helpful in pulling attending to word constructing units. This may be peculiarly utile with progress scholars. For illustration, the word ‘separate ‘ contains the root ‘par ‘ which is besides in ‘part ‘ . Therefore, the spelling is ‘separate ‘ non ‘seperate ‘ .Pronouncing the word the manner it is spelledTeaching spelling is one of the great challenges of linguistic communication instruction. As a guideline, Nation ( 2009 ) encourages that students may be encouraged to i ntentionally misspeak a word like ‘yacht ‘ /yaect/ as a sort of mnemonic for spelling. Learners may besides be encouraged to look at a word, close their eyes and seek to ‘see ‘ the spelling of the word in their head. This is what is called ‘visualising ‘ a word.The instance for incorporating linguistic communication acquisition accomplishmentsAlthough a big figure of traditional methods of linguistic communication larning continue to be utile, current surveies encourage incorporating linguistic communication accomplishments in the linguistic communication schoolroom. For case, learning reading can be easy tied to instruction on authorship and vocabulary, and unwritten accomplishments lend themselves to learning pronunciation, listening and cross-cultural linguistic communication interaction ( Hinkel 2001 ; Lazaraton 2001 ; McCarthy & A ; O'keeffe 2004 ) . Task-based instruction of L2 accomplishments has built-in chances for more accurate and complex utilizations of linguistic communication ( Ellis 2003 ) . For illustration, narrations and description undertakings in fluency-focused instruction, arguments and problem-solving undertakings promote increased grammatical and lexical complexness in learner linguistic communication. Through these undertakings a significant betterment in the sum of spoken discourse and in grammatical, lexical and articulative competency is enhanced. English linguistic communication has become more internationalised, and hence, instruction of accomplishments such as pronunciation has shifted from aiming native-like speech patterns to aiming intelligibility ( Tarone 2005 ) . In this respect, instruction has to turn to issues of segmental lucidity, that is, the articulation of specific sounds, word emphasis and inflection and the length and timing of intermissions. The current attack to learning pronunciation is by and large based on three principled standards. First, pronunciation and modulation are taught in context and in concurrence with specific accomplishments. Second, direction in pronunciation serves broader communicative intents, and eventually but non least, the instruction of pronunciation and modulation is based on realistic instead than idealistic linguistic communication theoretical accounts ( Chun 2002 ) . The 1980s saw a displacement from the position of L2 listening every bit preponderantly lingual to a schema-based position, and listening teaching method moved off from its focal point on the lingual to the activation of scholars ‘ top-down cognition ( Hinkel 2006:9 ) . Emphasis now, is on the incorporate instruction of listening for communicating and in concurrence with other L2 accomplishments such as speech production, socio-pragmatics, grammar and vocabulary. The lingual and schema-driven strands of learning listening have found a niche in current incorporate attacks, such as task-based or content-based direction ( Snow 2005 ) . The design of listening pattern, for case, can integrate a figure of characteristics that make the development of L2 listening abilities relevant and realistic. Listen-and-do undertakings, for illustration, stand for a flexible beginning of listening input for get downing o intermediate scholars. The content of undertakings can be easy controlled in respect to their lingual and conventional variables, such as frequent happenings of mark syntactic and lexical constructions in the context of meaning-focused undertaking ( Ellis 2003 ) . This is done in countries of grammar buildings, words and phrases or colloquial expressions.Recent research has shed a great trade O visible radiation on the procedures and acquisition of L2 reading. As in hearing, L2 reading involves both top-down and bottom-up cognitive processing. Eskey ( 1988:95 ) suggests that the strongly top-down prejudice neglected scholars weak Aress of lingual processing. the bottom-up processing of reading involves a wide array of distinguishable subskills, such as word acknowledgment, spelling and phonological processing, morpho syntactic parsing and lexical acknowledgment ( Eskey 2005 ) . The reader needs to garner ocular information from the written text, place the significance of words, and so travel frontward to the processing of the construction and significance of lager syntactic units, such as phrases or sentences. Ocular processing of words and letters represents a cognitively complex undertaking ( Koda 1999 ; Chikmatsu 1996 ; Shimron & A ; Savon 1994 ) . Readers whose L1 writing systems are markedly diffrent from the that of L2 may be slowed down in their reading procedure by the demand to achieve fluid L2 word acknowledgment before geting text-processing accomplishments. The findings of L2 reading research on the cardinal function of bottom-up processing, word acknowledgment eloquence, and the acknowledgment of the morphophonemic construct ion of words and phrases have led to substantial displacements in reading and literacy direction to immature and big L2 scholars likewise. As an illustration, in 1999, the National Literacy Strategy in the UK introduced work on phonics, word acknowledgment, and in writing cognition primo to sentence and text degrees of direction ( Hinkel 2006:13 ) . In teacher instruction, current methodological analysis text editions reflect the alteration in positions on learning L2 reading, literacy and authorship. Most influential L2 instruction and larning publications have seen the demand to include at least a chapter on the instruction of bottom-up reading accomplishments normally followed by direction in top-down and strategic reading ( Celce-Murcia 2001 ; Carter & A ; Nunan 2001 ; Mckay 1993 ; Nunan 1999, 2003 ; Wallace 1993 ) .

Economics 1- General Motors Essay Example | Topics and Well Written Essays - 750 words

Economics 1- General Motors - Essay Example he question directly, the cost structure of the combined entities, as General Motors, improved after the mergers, with the trimming of costs and improving profit margins even when the level of revenues remains constant. Economies of scale is possible only with a certain minimum critical size of firms in an industry such as the automobile industry. The company continued its acquisition binge in the ensuing years. Management decisions that improved operations included reduction of costly factory errors with the establishment of a testing laboratory, and setting up of facilities for research and development, which turned out to be the most complex in the industry at the time. These contributed to improved efficiency and productivity. During the 1920s the big car manufacturers were GM and Ford, followed by Chrysler in 1925 (American Motors was formed only in 1954). At that time only Ford posed a semblance of competition to GM. GM proceeded with some major innovations in management systems using policy coordination from the top, policy direction through top-level committees, and delegation of responsibilities - practices that were to become standard in business management theory and practice. In the late 1920s, GM introduced the synchromesh gears by Cadillac, the shatter-proof safety glass, and the V-16, the first car type with a 16-cylinder engine, setting standards in power and performance. Then it pioneered in innovations in styling and engineering, capped by the discovery of the automatic gear. GM also developed the independ4ent front wheel suspension and the automatic transmission under Sloans leadership before the WWII. In the 1950s GM introduced the V-8 engine with a higher compression ratio, power steering , air-conditioning systems, safety belts, among others. In short, the company outdistanced its competition through design and engineering as demonstrated in the functional quality of cars it produced. In the area of marketing strategy, GM boss Sloans

The Adoration of The Shepherds by Hugo Van Der Goes Essay

The Adoration of The Shepherds by Hugo Van Der Goes - Essay Example One shepherd is happy to see the child and pious, the second one is just curious while the third one has some sort of suspicion or confusion regarding the whole incident (Van Der Goes). In this way, and also reflected in the dressing the shepherds in very shepherd-like clothes, the painter has tried to make his painting as close to reality as possible (Van Der Goes). The appearances of these three shepherds are summarized by Kleiner as â€Å"lined faces, work-worn hands and uncouth dress and (a) manner (that) seem immediately familiar† (408). The sheaf of wheat on the floor is another nuance added to the painting to have a realistic effect. The presence of the two cows in the picture has also reinforced the realistic tradition of this picture. Altogether, the picture can said to be anchored in realism and drawing resources also from emotionalism and symbolism to enrich that realism or to add a new divine dimension to that. The minute detailing in the depiction of drapery, the flowers, and the animals are another dimension of the realism inherent to this painting. The expressions of the people present in the scene, including that of the Virgin, attribute a high degree of emotionalism to the painting. Mary’s face is full of sorrow as if she is aware of the agonies that future has in store for this child (Van Der Goes). She is looking at the child with great pity. And the angels also have a similar kind of expression (Van Der Goes). The emaciated appearance of the child adds to the pathos of the scene. Even one cow in the cowshed is looking at the child with great sadness. Thus there is the presence of a divine foresight in the scene; a premonition of kind (Kleiner, 408). On the contrary, the shepherds are showing more mundane emotions and are balancing the sadness of the scene with a matter of fact presence (Van Der Goes). Also it can be seen that in this painting, emotionalism is used in a complementary manner to add on to realism. This is a technique which is counted as very effective, as emotions always add intensity to the realness o f the situation. Many symbolic elements are also present in this painting. The blue colored dress that Mary is wearing is suggestive of a great expanse of sadness that surrounds the story of Jesus. Blue can also be seen as a color of compassion and repentance. It is the color of eternal peace that can only be achieved through salvation. In this way, Mary of this painting has personified the essence of the message of Jesus Christ. Here it can be seen that emotionalism and symbolism have a mutually supplementing relationship. Depiction of the child lying on the ground rather than in a crib, with a golden aureole surrounding him, is symbolic of two things- his ability to walk among the downtrodden, and his divinity (Van Der Goes). The sheaf of wheat on the floor has been interpreted by art critics as symbolic of Bethlehem (Kleiner, 408). This is so because, the meaning of the word, Bethlehem is ‘house of bread’, in Hebrew (Kleiner, 408). From common knowledge, it can be as sumed that the orange lilies offered to the child are symbolic of passion and the white irises of purity. In religious terms, the purple irises as well as the columbine stalks have been considered as representative of the seven sorrows of the virgin (Kleiner, 408). The fifteen angels seen together inside this painting along with the two supporting paintings of Portinari altarpiece, have been conside

Software Requirements Specification Essay Example | Topics and Well Written Essays - 6250 words

Software Requirements Specification - Essay Example To address this problem PCI offers its clients a service that would allow clients to forward all their calls to them and PCI in turn would collect all the messages and forward them to employees that are on the road and away from their desk. These messages would usually be forwarded to their phones or pagers. Goals of the project The basic goal of the project is to ensure that the company’s clients’ businesses are not affected because their employees are on the road and important messages do not reach them. The second goal of the project is to improve communication between employees of a business and the headquarters of the business to ensure that there is better coordination amongst them all. The final goal of the project is to help PCI improve their overall service and ensure that they retain their old customers and obtain new customers as well. Stakeholders of the project The company: One of the main stakeholders for the project is the company for which the system is being created. The company would also be the main user of the software that is going to be developed through this project. The company’s name is PCI (Pivotal Communication Inc.). Clients: The second major stakeholders are the clients to whom PCI would provide its services to. These clients would be able to only get their desired service if the project being worked on is a success. Software Company and the development team: The software company that is responsible for developing the solution for the given issue have an equal share in this project. The software company tends to make a great deal of profit with the successful completion of this project. Other stakeholders: The complete list of stakeholders can be viewed in the diagram below Users of the software: The main users of the system developed would be PCI’s agents. Agents are responsible for answering and handling all the transactions regarding a call or message that is supposed to be provided to a particular cli ent. The second users of the system would be the clients that would interact with the system to manage messages and calls that they receive. Characteristics used to define users The users that have been identified above would be assessed in the following categories. The categories would be helpful in identifying the correct functional and non-functional requirements of the project. Understanding of technology Physical impairments Qualifications and credentials Project constraints Mandated constraints Resource constraints: The software is to be developed using the resources that have been provided by PCI. The developers have to work within the time frame provided and equipment that the company owns. Requirements constraint: The graphic user interface of the system should be easy to work and operate. Users of the system must easily understand how to operate the system and employees of client companies must be able to easily handle the messages they receive. Legal constraint: The contr act that PCI has signed with its clients states that PCI is responsible for storing all the messages it receives for at least 90 days. This means that the system should be able to store vast amounts of data. Furthermore PCI is required by law to inform callers that their calls are being recorded. This means that before recording a message the system must inform the caller that their call is being recorded. Glossary Glossary of all terms: The following table contains a

Analysis Of Mans Search For Meaning By Viktor Frankl Essay

Analysis Of Mans Search For Meaning By Viktor Frankl - Essay Example Next, Frankl mentions creativity and enjoyment as factors that contribute to the meaningfulness of life. Most people feel their lives to be meaningful when they have opportunities for self-expression. Meaninglessness is sensed, when a person is deprived of the above-mentioned outlets and isn't able to admit meaningfulness of both negative and positive life events, i.e. – in a particular case of death camp imprisonment – suffering. "Everything can be taken from a man but one thing: the last of the human freedoms—to choose one’s attitude in any given set of circumstances, to choose one’s own way†. Therefore, inability to admit the fact that even the bitterest situations have to mean, i.e. inability to change one's attitude towards unfavorable circumstances that cannot be changed, is another element of the state of meaninglessness. The third element of the discussed state is demolition of the values that were held by an individual: "Under the inf luence of a world which no longer recognized the value of human life and human dignity, which had robbed man of his will and had made him an object to be exterminated [†¦] the personal ego finally suffered a loss of values". Another element contributing to the state of meaninglessness is a lack of love, for Frankl sees love as a powerful motivator.According to Oakley, â€Å"people who find their own lives meaningless are also suffering, in varying degrees, failure of motivation, anhedonia, and distress†.

Forensics f report Essay Example | Topics and Well Written Essays - 250 words

Forensics f report - Essay Example The first task was to secure the perimeter around the car; an event that did not take long, for the distance was not wide. Consequently, the crime scene became (exhibit P-1, P-2, P-3, and P-4). The officers realized that two bodies were at the crime scene, with the body on the driver’s seat; (exhibit D), being identified as Sally Lee exhibiting black hair and white skin. Preliminary assessments indicated that an unknown person had shot Lee on the head and throat. Both shots were visible, and it was apparent that they had come from outside the car (exhibit P-5). The victim’s head was lying on the steering wheel with both of her hands on her knees. The second victim was Megan White, a young female with white skin and brown hair who had been shot from the back and on the throat as well. She was lying on the ground a few feet away from the car (exhibit F-1). The victim encountered the ground with her face and stomach, and had both hands spread a little bit forward (exhibit A-2). The officers went ahead to picture and videotape the scene, before bringing the sketchers on board. The sketchers entered the crime scene alongside both the searcher and Custodian. After pictures, videos, measurements and sketch details were taken from the victims; a coroner was called to the location to carry the bodies out of the crime scene. At the same time, the chief Meunier arrived at the scene to help in searching for additional evidence. While the team was searching for evidence, two white males approached the team, and got extremely close to the crime scene before being repelled by the officers (exhibit K-1). The first male later identified as Jack Russell, wore a blue t-shirt, black sunglasses, a brown hat and carried what looked like an alcohol bottle. The second male identified as Mike McDonald, wore a blue shirt with orange glasses and

Anti-Drinking Campaign in the University of Minnesota Essay

Anti-Drinking Campaign in the University of Minnesota - Essay Example This section also details why a total ban on alcohol can not work citing developments that occurred during the American Prohibition era as a sample case study. Further, it explains the reasons why Community College Events should be factored in when controlling alcohol use. The next section mirrors on ways or methods which should be adopted to arrest the problem. The last section is conclusion and recommendations. 2.0 Introduction 2.1 Aim of the Research Proposal This research proposal aims to achieve a number of objectives. The overall objective is to demonstrate the importance of reducing and managing alcoholism at the University of Minnesota and how the budget of doing that can be reduced. The specific objectives include 1. Assessment of alcoholism in the United States colleges and the biases therein 2. Demystifying complete elimination of alcohol sale by focusing on the lows of prohibition period that took place in the United States for 14 years. In doing so the proposal argues in favour of alcohol provision but with legal/policy interventions to restrict its usage 3. The adoption of a number of measures to limit alcohol use in schools and community events 2.2 Background of Study/ Context Analysis 2.2.1 Importance of Restricting Alcohol Drinking in College Community Events Casady, Flora and Foote (2007) observe that community events are sometimes characterized by students and underage youths easily getting drunk because of availability of alcohol. About 50% of alcohol intake at community festivals is done by students or youth. These authors propose alcohol ban or restrictions in colleges or community events by curtailing sales through policies such as ID checking or reducing the number of servings that are extended to individuals. This is their view ultimately minimizes access to alcohol by students. They further cite studies which show that in an average event 50% those that are already intoxicated have 80% chance of buying more. Further, this kind of behav iour sometimes brings about disruption, vandalism and other anti-social behaviours. In 2004 professional basketball, a number of these behaviours were witnessed with many drunken students throwing beer bottles and cups at players on the court. Thus measures such as stopping alcohol sales at some point are important in mitigating such occurrences (Casaddy et. al, 2007). 2.2.2 Why Complete ban of Alcohol is a mirage and fruitless: Case Study of Era of Prohibition in America The reasons why the complete ban of alcoholic drinks in America is fruitless can be found in the analysis of the prohibition era. Peck (2009) observes that by the end of the World War 1 a number of changes had taken place in America, one of which was the nonexistence of alcoholic drinks. The American Government had put in place a policy that prompted the elimination saloon intoxicating liquor. Broadly speaking the era of prohibition refers to the epoch in the history of the United States when the production, sale a nd the transportation of liquor were unlawful for a period of 14 years (1920-1933) (Peck, 2009). One question that immediately comes to mind and which this proposal is interested in is, â€Å"Why was this measure put in place?†Ã‚  Ã‚